OnlineNH3
Online determination of NH3 in gases
Product description
The OnlineNH3 is used for the continuous quantitative determination of ammonia gas (NH3) in gas mixtures.
The system is designed with an integrated dilution step for measurement of very high concentrations (100 - 20000 ppm). Also very low contents in the range of odour treshold (0.1 - 100 ppm) can be measured.
The OnlineNH3 contains a selective amperometric sensor with gas selective membranes, membrane pumps for gas transportation and sample transfer and an integrated PC for continuous recording of measure-ment data, trends and alarm states. The measurement values can be transmitted via digital (alarm-) and analog outputs into the control room.
Due to an integrated cleaning system the gas analysis in O2 free gases (e. g. biogas) is realized without any drift effects. Because of the stress free mode of operation, the sensor lifetime is considerable increased.
The operation principle makes the OnlineNH3 ideal as a basis for NH3 adjusted regulation of enrichment and cleaning steps.
The instrument is available in the same design for monitoring of hydrogen sulphide (H2S), sulfur dioxide (SO2) or ozone (O3).
Analyzer for online determination of NH3 in gases
Applications
- As basis for NH3 adjusted regulations (e. g. monitoring of air quality in livestock buildings)
- Environment analysis
Fields of application:
- Industrial sectors
- Animal husbandry
- Biogas plants
Advantages
- Fully automated sample dosing
- Hardly any cross-sensitivities due to selective electrochemical sensor
- Output 4 - 20 mA for integration of the NH3 signal into the local control system
- Long sensor life due to intermittent gas path gas path switching
- Active sample aspiration, thus free installation (wall mounting) with up to 100 m distance from the sampling point
Features
- Continuous NH3 determination in gases (measurement duration < 5 min)
- Robust analysis method
- Easy calibration steps
- Software easy-to-use
- Integrated rinsing steps for measuring of continually
- Fresh samples
- Active sample intake of the gas up to a distance of 100 m – variable setup of device (wall mounted)
- Also available for determination of hydrogen sulphide (H2S), sulphur dioxide (SO2) or ozone (O3)
